Скачать или смотреть BOC - How to set up a regulator

Products featured in video:
Promaster gas kit Australia http://www.boc.com.au/shop/en/au-boc-...
Promaster gas kit New Zeaan http://www.boc.co.nz/shop/en/nz-boc-i...
Acetylene regulator http://www.boc.com.au/shop/en/au-boc-...
Oxygen regulator http://www.boc.com.au/shop/en/au-boc-...

Always read the labels and safety data sheets before using gas products. Regulators must be used only with the gases and pressures for which they are designed. If you are not sure check the pressure rating stamped on the back of the regulator. In Australia the pressure adjusting knob is colour coded to assist with selecting the correct regulator. Black -- Oxygen and Red - Acetylene.

Prior to installing and operating your regulator, read and follow the operating manual.
Follow safe workplace practices and ensure you have a fire extinguisher close by.
Wear personal protective equipment such as safety shoes, eyewear and gloves.

Check that the regulator inlet connection is compatible with your cylinder connection.
Always inspect your regulator for damage EVERY TIME you use it. Regulators should be checked weekly, tested every year, and replaced every five years as described in the Code of Practice for Welding Processes and AS4839.

It is important to ensure that the O ring is in place and in good condition. Inspect the cylinder valve threads for damage and be sure the cylinder valve is free of oil, grease, dirt or any foreign material.
Always replace the protective cap when removing the regulator from the cylinder.

Attach the regulator to the cylinder valve and secure tightly using a regulator spanner. Before attaching any regulator ensure that the pressure adjusting knob is fully backed up (turned anti-clockwise until it stops).