Part 2: Repair and Prep - DIY Classic Wooden Boat Minor Hull Repair,

We have to paint and prep the boat bottom every year before it goes in as well as check around the rest of the outside for issues. We ran into some minor rotting just under the waterline that I needed to fix with Git Rot and an appropriate fairing compound.

Previous Videos to Series:
Installing Rebuilt Hercules Engine in 1960 27' Chris Craft Constellation:    • Installing Rebuilt Hercules Engine in...  
Part 1: Intro - DIY Classic Wooden Boat Minor Hull Repair:    • Part 1: Intro - DIY Classic Wooden Bo...  
Part 2: Repair and Prep - DIY Classic Wooden Boat Minor Hull Repair:    • Part 2: Repair and Prep - DIY Classic...  
JB Weld Repair of Exhaust Elbow on 1960 Chris Craft Constellation:    • JB Weld Repair of Exhaust Elbow on 19...  
Adjusting Antique Chris Craft Transmission: https://youtube.com/shorts/DpJ6aGXYmZ

Other videos in series:
5 Ton Chris Craft: DIY Classic Wooden Boat Minor Hull Repair, Part 1 - Introduction:    • Part 1: Intro - DIY Classic Wooden Bo...  
5 Ton Chris Craft: Part 2 - Repair and Prep - DIY Classic Wooden Boat Minor Hull Repair: https://www.youtube.co"m/watch?v=RNVavLmvyjY
5 Ton Chris Craft: Part 3 - Final Rot Out of 27' Chris Craft Constellation, Reframing in Process
5 Ton Chris Craft: Part 4 - Marine Plywood Mostly Installed:    • 5 Ton Chris Craft: Part 4 - Marine Pl...  
5 Ton Chris Craft: Part 5 - Structural Supports Finished, Cutting/Planing Bottom Planks:    • 5 Ton Chris Craft: Part 5 - Structura...  
5 Ton Chris Craft: Part 6 - It will Float if the Flood Comes:    • 5 Ton Chris Craft: Part 6 - It will F...  
5 Ton Chris Craft: Part 7 -Wood Prepped and Bottom Painted:    • 5 Ton Chris Craft: Part 7 -Wood Prepp...  
5 Ton Chris Craft: Part 8 - Prepping and Launching Boat:    • 5 Ton Chris Craft: Part 8 - Prepping ...  

Git-Rot Info: https://www.jamestowndistributors.com...
3M 5200 Spec Sheet: https://technicaldatasheets.3m.com/en...
Pettit 1933 Copper Bronze Anitfouling Paint: https://www.pettitpaint.com/media/526...

Donate to the Turbine Guy:   / turbine_guy  

Please subscribe to my channel !!!