Скачать или смотреть Vacuform table part 2 by Nathan Lacroix

See part 1:    • Vacuform table part 1 by Nathan Lacroix  


Adjusted cost for all of the parts

Particle board = $2.16
2 x 4 = $3.29
peg board = $3.99
Vinyl foam insulator = 1.98
2 Inch PVC = $1.33
3 Inch Wood screws (I used 24) = $0.95
Gorilla glue (I used 4 ounces) = $1.99
HVAC foil tape (I used half the roll) = $3.94
Silicone (whole tube) = $5.21
1 sheet of 0.060 PETG = $6.00
12 binder clips for the plastic holder = $3.79

Cost actual for the table so far

$34.63

Credits and shout outs

David Stein for the MDF top board idea

Charles Roland - for the idea on the mid-table support

Scott hammond - for the quartz heating idea

Jack DiRossi - for the weather stripping advice

George Crenshaw & Igor Pinsky- on where to get plastic sheets and the best thickness

The RPF -    / therepli.  .

Bill Duran | Prop Tarts | Punished Props -    / punished.  .

Tested -    / testedcom  

Evil Ted Smith -    / evilted40  

Cosplay Apprentice -    / skoj17  

Xrobots -    / jamesbruton  

The Distillers