Скачать или смотреть Review of Redline Galvanized Steel UShaped BoltOn Brackets Plastic Single Axle Fender - PF1135-BKT-2

Click for more info and reviews of this Redline Trailer Fenders:
https://www.etrailer.com/Accessories-...
Check out some similar Trailer Fenders options:
https://www.etrailer.com/dept-pg-Acce...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Redl...
Hi everybody. Andy here with etrailer.com. Let's take a brief look together at this Galvanized Steel U-shaped Bolt On Bracket for your plastic single axle fender. Now, right up front, I do wanna let you know that you can either get a single bracket like I have here on my table before me, or you can pick up a pair of these brackets. And on your screen I am including our item numbers, either for the single one, or for the pair. And whichever setup is going to work best for you, you can just take that item number, pop it in the search field of our website.

That will take you to the one that you're looking for, either the single or the pair, and you can add that to your order. Now this hot dipped galvanized steel bracket is specifically designed to make it easier to mount the fender that you see there on your screen, identified by that item number. So if you have that fender, this bracket will make it easier to install this. And this is going to install with the hardware that you supply. So no hardware is included with this bracket.

And let me go ahead and just give you some overall dimensions so you can be confident that this is indeed what you need. So let me get my tape measure here. My ruler just isn't quite big enough to measure that length. So measuring end to end, we're sitting right at 13 and a quarter inches long. Let me bring that in there.

There we go. 13 and a quarter inches long. And then looking at the width, we're sitting right at about two and three quarters inches wide. And then each leg of the U, measuring inside there to the top of that U, we're right at a about an inch deep. Now I realize you're probably wanting some further measurements just to make sure this is going to work for you.

So rather than taking additional time and putting a ruler on every aspect of this bracket, take a look at that diagram that you see there on your screen, that's going to have virtually every measurement that you're looking for, just so you can be confident that this bracket is going to be just what you need. Well, I think that's going to wrap up our brief look today. I do hope that our time together was helpful for you. Again, my name is Andy. Thank you for joining me.