How to Replace Inner Fender Liner 2005-2010 Chrysler 300

Buy Now!
New Inner Fender Liner from 1AAuto.com http://1aau.to/ia/1ABMX04662

This video shows you how to install an inner fender liner on your 2005-2010 Chrysler 300. Fender liners protect the body and engine compartment of your vehicle from road debris, water, dirt, sand, and the like. If yours is worn, ripped, damaged, or missing, it’s a good idea to install a new one to protect your vehicle.

This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

Tools you will need:
• Phillips Head Screwdriver http://1aau.to/oa96/1AXAA00013
• 21mm Socket http://1aau.to/o79/1AXAA00043
• Trim Tool Set http://1aau.to/o2X/1AXXX00006
• 1/2 Inch Impact Gun http://1aau.to/ops/1AXAA00252
• Torque Wrench http://1aau.to/oato/1AXAA00044
• Gloves http://1aau.to/oJv/1AXSS00048
• Safety Glasses http://1aau.to/oC5/1AXAA00343
• Floor Jack http://1aau.to/oU7/1AXAA00068
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.