2020 INFINITI QX50 - Intelligent Key and Locking Functions

Описание к видео 2020 INFINITI QX50 - Intelligent Key and Locking Functions

"This video is copyrighted material of Nissan North America, Inc. and should not be copied, edited, or reproduced without the permission of Nissan.

Without removing the Intelligent Key from your pocket or purse, you can lock or unlock your doors, open the liftgate and start the engine.

The driver and front passenger’s doors are equipped with a one touch sensor that allows for easy unlocking of the vehicle. To unlock the driver’s or front passenger’s door, have the Intelligent Key with you then pull the door handle to open the door.

The other doors will remain locked.

To unlock the other doors, press the request switch on either the driver or front passenger’s door within one minute of using the one touch sensor.

The one touch sensor does not operate for two seconds after the vehicle has been locked. If this occurs, release the handle and then hold it again to unlock the door.

To lock your vehicle, push any door handle’s request switch once, after all doors have been closed.
These functions are available when the Intelligent Key is within approximately 2 ½ feet of the corresponding request switch.

To enable or disable the one touch sensor function:
● Press the MENU button on the control panel,
● Touch SETTINGS,
● Touch COMFORT AND CONVENIENCE, then
● Touch the TOUCH SENSITIVE DOOR SENSOR key.

The one touch sensor function is active when the indicator light on the screen is illuminated. When this function is not active, the driver’s door must be unlocked by pressing the door handle request switch while carrying the Intelligent Key with you.

Press the door handle request switch again within one minute to unlock all doors and the liftgate.

The Intelligent Key has remote keyless entry functions that can operate within approximately 33 feet of the vehicle.

Press THIS button to unlock the driver’s door. Quickly press this button again to unlock the remaining exterior locks.

Once the doors are unlocked, press and hold the unlock button for more than 3 seconds to lower the automatic windows, if so equipped.

Press THIS button to lock your vehicle. The hazard lights will flash and the horn will beep to let you know the doors have been locked.

If you exit the vehicle and close the door without the Intelligent Key, all doors will unlock and a warning chime will sound.

Pressing and holding both the lock and unlock buttons for more than 2 seconds will deactivate the horn beep feature. The hazard lights will flash three times letting you know the feature has been turned off. To turn it back on, press and hold both buttons again for longer than 2 seconds. The hazard lights will flash once and the horn will beep once.

Your Intelligent Key is also equipped with a panic alarm button. To activate the panic alarm, press and hold THIS button. The alarm can be deactivated by pressing any button on the key fob.

In the event that the Intelligent Key battery is dead, you can find a mechanical key on the back side of the key fob. Release the lock knob to slide out the mechanical key.

Up to four Intelligent Keys can be used with one vehicle, as long as the key is registered with an INFINITI retailer prior to using the system.

The Intelligent Key contains sensitive electrical components. Please avoid these circumstances that could affect its operation:
● Avoid dropping or striking it against another object,
● Keep it away from water,
● Keep it away from equipment with magnetic fields, including computers, cell phones, TVs and audio accessories, and
● Avoid using a key chain that contains a magnet.

Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information."

Комментарии

Информация по комментариям в разработке