Скачать или смотреть Desk mounts VRaptorV

Deskmounts for different setups of controllers and throttles

Construction:
Made almost entirely of aluminum, significantly reducing the weight of both mounts to around 3 kg.
Anodized silver or black 3060 aluminum profiles provide an aesthetic visual effect.
Profiles are connected with internal connectors and finished with end caps.
The entire assembly is fastened with hex screws.
Adjustability:
Large range of adjustability, with vertical profiles of standard length 25cm or 30cm, allowing for a lowering or raising of the setup within a range of 15/20 cm. Adjustable top and bottom clamping mounts with a jointed screw (movable joint allows for clamping even at an angle) enable the mounting of setups on various thicknesses of tabletops.
Large rubber foot for clamping. Adjustable clamping force. Front and rear mounting plates can be adjusted to move the joystick closer or farther away from the desk.
Rubber pads are used under the mounting plates and clamping mechanism to protect the tabletop and prevent scratching of the profiles during adjustment.
Installation:
Once adjusted to the tabletop, the mounting process is very easy. The setup can be attached or detached in just a few seconds. Dimensions: Standard vertical profiles are 25cm or 30cm in length. Horizontal profile for throttle is 30cm. Horizontal profile for joysticks is 20cm.
More photos can be found on the Facebook VRaptorV profile.