How to install a metal roof? | Direct-to-deck | Steel Canada Roofing and Siding Limited

How to install a metal roof? | Titan Northern Slate | Steel Canada Roofing and Siding Limited

Tools required
for the Installation

• 6 inch hand benders
• Chalk line
• Cordless Drill
• Cordless Shears (Battery Powered)
• Hammer
• Hand Break
• Left and right sheet metal snips (Reds & Greens)
• Measuring Tape
• Safety Harness

Procedure:
00:36 - Step 1. Install the starter strip
01:02 - Step 2. Apply membrane
01:20 - Step 3. Apply ice and water shield
01:40 - Step 4. Install the valley flashing (if applicable)
02:35 - Step 5. Install the valley flashing (cont’d)
04:14 - Step 6. Place the adjustable starter in the valley
05:34 - Step 7. Install the gable
06:34 - Step 8. Caulk the valley
06:45 - Step 9. Apply Expandable M-Seal
07:12 - Step 10. Install the direct-to-deck metal panels I
07:30 - Step 11. Install the direct-to-deck metal panels II
08:54 - Step 12. Install the Snow Guard
09:38 - Step 13. Lock in panels and press panel edges
11:38 - Step 14. Installing difficult trim panels I
12:50 - Step 15. Installing difficult trim panels II
13:45 - Step 16. Installing difficult trim panels III
14:08 - Step 17. Install the trim line vent system
14:30 - Step 18. Install the ridge and hip caps

Please visit our website for more details: https://www.steelcanadaroofing.com/

Please also contact us at 905-890-5120 or email us at [email protected] for a free roof quote!

Visit our Office:
355 Traders Blvd. East,
Mississauga, Ontario,
Canada
L4Z 2E5
https://g.page/steelcanadaroofing?share

Warehouse:
375 Matheson Blvd East
Mississauga, ON
Canada
L4Z 1X8
https://goo.gl/maps/S8rxHYvSCV91JR8g6