PUSH START & STOP BUTTON installation | No Splicing of Wires

If you'd like to support this channel, which is never expected but always appreciated, please use this link: https://paypal.me/Viosified?country.x...

PUSH START & STOP BUTTON installation | No Splicing of Wires is a detailed tutorial on identifying, testing and matching each of the wires in the stock ignition harness of a Toyota Vios Gen 3 for a non destructive installation of an RFID-based Smart Start System module.

The video walks you through the preparation process of the wire connectors and installation of the push start and stop button kit as an upgrade to the current key ignition system. The principles used may be applied to other vehicles as well.

The non destructive approach of this installation preserves the integrity of the stock wiring and makes everything 100% reversible in case you want to go back to the original key ignition set up. With this method you won't have to worry about splicing the wires and potentially causing short circuits later on due to exposed or improperly insulated cabling.

The car used for this video tutorial, a 2015 Toyota Vios, has no built-in immobilizer and the keys are not chipped. This upgrade to an RFID-based push start and stop system provides extra security to this car against unauthorized use or theft.

By the time you finish this tutorial you will have a better understanding of how the stock Vios Gen 3 ignition key harness was set up. Each wires are repeatedly identified and shown up close to help you get familiarized with each of them.

As always, please use caution and common sense if you wish to perform this or any modification to your car. Always put safety first and seek the help of a professional whenever necessary.

Please bear in mind that this is for educational purposes only. VIOSIFIED Car DIY shall not be held responsible for any damage, injury, or loss that may be incurred or caused by the misuse or improper application of the information in this video.


#PushStartButton #PushStartAndStopButton #Viosified

Fluidscape by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/...

Source: http://incompetech.com/music/royalty-...

Artist: http://incompetech.com/