Diy Sliding door motorized || how to convert any sliding door to automatic sliding door

Hi

In this video, I and my friend have converted a conventional sliding door to mechanical motorized sliding door which functions just great. For this, we took an old car power window motor a few other components like nylon rollers and a synthetic rubber nylon string to be used as a push-pull string. We attached the string on to the door with springs so as to absorb shock at endpoints. We kept this setup simple by not using limit switches because it would have had complicated the setup. We used a 12v 10Ah battery with the automatic charger to power up this entire setup. Relays and other components used along with some wires and a two-way push to on switch to open and close the sliding door. The project came out very well and we were very satisfied with the result. The list of parts is as below:

1) Power window motor
2) Nylon-rubber synthetic string
3) Nylon base 40mm and nylon pulleys 40mm with bearings(4 Nos)
4) Two relays DPST 12v
5) Some miscellaneous wires.
6) SPDT momentary on switch.

The circuit diagram is linked below
https://drive.google.com/open?id=1BYm...

other interesting video of DIY e bike from petrol to electric that you may like link below


   • Diy no problem geared electric bike |...  

For more tech stuff visit to my website at the following link
www.techtube360.com

#diymotorizedslidingdoor, #slidingdoor, #diyslidingdoor

Music Credits:
Youtube studio