How to Bleed and Grease a Jack - Harbor Freight 3 Ton Low Profile

UPDATE: Since making this video, it was brought to my attention that I bled the wrong screw. The fill screw is not the Phillips head screw I loosened, it’s the flat head screw just above it on the hydraulics between the springs. This is the correct screw to bleed, although I saw similar results on either one. It’s always best to follow the manufacturer instructions and only bleed the fill screw.

In this video, I give you step by step instructions on how to bleed and grease a jack. I'll be demonstrating on my Harbor Freight, Pittsburgh, 3 Ton, Low Profile Jack, but the procedure is applicable to most jacks.

In the video I mention an unboxing and basic product review test I did a couple months ago. To see that video click this link:    • Harbor Freight Pittsburgh 3 Ton Low P...  

Here are links to the grease gun and grease I used in the video:

CarBole 4500 PSI Heavy Duty Pistol Grip Style Grease Gun
https://amzn.to/2RTbN2G

Valvoline SynPower Synthetic Automotive Grease - 14.1oz (VV985)
https://amzn.to/2RXbzaP

If you have any questions or comments, leave them below and I'll do my best to answer them.

Credit:
Music provided royalty free by iMovie

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!