How to Replace Valve Cover Gasket 2003-2008 Toyota Corolla

Buy Now!
New Valve Cover Gasket from 1AAuto.com https://trq.video/ia-TYEGS00006

This video shows you how to install a valve cover gasket on your 2003-2008 Toyota Corolla. Valve covers will begin to leak oil when the seals eventually break down. A new valve cover gasket will make sure the oil stays inside the engine where it belongs!

This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla

Tools you will need:
• 10mm Socket https://trq.video/oa32-1AXAA00017
• 12mm Socket https://trq.video/obmE-1AXAA00015
• Ratchet https://trq.video/obvb-1AXAA00016
• Torque Wrench https://trq.video/oayS-1AXAA00044
• Brake Parts Cleaner
• Gloves https://trq.video/oUv-1AXSS00048
• RTV
• Safety Glasses
• Rubber Mallet

Subscribe:    / @trq  

Check out our playlist:
Toyota Corolla 9th Generation 2003-2008:    • Toyota Corolla 9th Generation 2003-2008  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.