Creating boat hull in FreeCad (Curved Shapes workbench tutorial) - Part 2

A short (mostly silent) tutorial on how to create a simple 3D boat hull using the (not standard) Curved Shapes workbench in FreeCad. I use this for designing UAV wings, fuselages, boat hulls, ...

This video is a response to the comment by ‪@sancak099‬ on our previous video. Here, we started from nothing and drew accurate paths in Inkscape. We hope this gave some extra insight. Be sure to pause the video if needed when following along.


See the previous video here:    • Creating boat hull in FreeCad (Curved...  



Inkscape: https://inkscape.org/release/
FreeCAD: https://www.freecadweb.org/downloads.php

We have extensive experience in the design of off-grid electrical systems for expedition vehicles, yachts, diy vans, tiny houses and other utility vehicles using Victron Energy components. We provide the service of designing custom Victron systems and hope to do this for a long time, contact us regarding your own project via our website:
https://vvvvdrones.odoo.com/shop/elec...
For a cheap DIY-van electrical drawing: https://vvvvdrones.odoo.com/shop/diy-...



See initial testing of our parachute system in action:   / cdovqhqhkpj  


Follow our story on Instagram: @vvvvdrones
  / vvvvdrones  

Thank you for watching.
Subscribe and turn on the notifications on our YouTube channel.

For business, send an email to: [email protected]

----------------------------------

VVVVdrones from VVVVEngineering
UAV Design | UAV Manufacturing | UAV Solutions
Drone & Aircraft Company,
Founded in Belgium, set up in Spain.
Website/shop: https://vvvvdrones.odoo.com/
----------------------------------

Tags

#vvvvengineering #uav #unmannedtech #victronenergy #unmannedsystems #unmannedaircraft #rchelicopter #carbonfiber #maidenflight #racedrone #racingquad #canard #vtol #xflr5 #autopilot #mems #pcb #3dprinting #3dprint #etching #balco #prototype #drone #freecad #blender

Time stamps:
00:00 Intro
00:12 Drawing .svg paths in Inkscape
09:08 Importing .svg paths in FreeCAD
09:33 Converting paths to sketches
09:51 Positioning of the sketches
10:18 Making the curved shape (boat hull)
11:03 Adding a detail [1] (cutting the curved shape)
13:52 Adding a detail [2] (sweep-cutting the curved shape)
20:37 Rendering the shape in Blender
21:19 Final result

21:24 Outro