Configuring VLAN Access & Trunk Switch Devices on Huawei Simulator eNSP

Configuring VLAN Access & Trunk Switch Devices on Huawei Simulator eNSP


1. Create a topology like the following

2. Setting IP address on each PC

3. Perform a ping test between PCs to test the LAN network

4. Configure VLANs on LSW1 & LSW2 switches


== LSW1 ==



*Create VLAN*
[Huawei]vlan 10
[Huawei-vlan10]description VLAN 10
[Huawei-vlan10]quit
[Huawei]vlan 20
[Huawei-vlan20]description VLAN 20
[Huawei-vlan20]quit


Set Access Port*

[Huawei]int eth0/0/1
[Huawei-Ethernet0/0/1]port link-type access
[Huawei-Ethernet0/0/1]port default vlan 10
[Huawei-Ethernet0/0/1]quit
[Huawei]int eth0/0/2
[Huawei-Ethernet0/0/2]port link-type access
[Huawei-Ethernet0/0/2]port default vlan 10
[Huawei-Ethernet0/0/2]quit
[Huawei]int eth0/0/3
[Huawei-Ethernet0/0/3]port link-type access
[Huawei-Ethernet0/0/3]port default vlan 20
[Huawei-Ethernet0/0/3]quit
[Huawei]int eth0/0/4
[Huawei-Ethernet0/0/4]port link-type access
[Huawei-Ethernet0/0/4]port default vlan 20
[Huawei-Ethernet0/0/4]
[Huawei-Ethernet0/0/4]quit


*Set Trunk Port*

[Huawei]int gi0/0/1
[Huawei-GigabitEthernet0/0/1]port link-type trunk
[Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[Huawei-GigabitEthernet0/0/1]quit


==LSW2==


*Create VLAN*
[Huawei]vlan 10
[Huawei-vlan10]description VLAN 10
[Huawei-vlan10]quit
[Huawei]vlan 20
[Huawei-vlan20]description VLAN 20
[Huawei-vlan20]quit


*Set Access Port*

[Huawei]int eth0/0/1
[Huawei-Ethernet0/0/1]port link-type access
[Huawei-Ethernet0/0/1]port default vlan 10
[Huawei-Ethernet0/0/1]quit
[Huawei]int eth0/0/2
[Huawei-Ethernet0/0/2]port link-type access
[Huawei-Ethernet0/0/2]port default vlan 10
[Huawei-Ethernet0/0/2]quit
[Huawei]int eth0/0/3
[Huawei-Ethernet0/0/3]port link-type access
[Huawei-Ethernet0/0/3]port default vlan 20
[Huawei-Ethernet0/0/3]quit
[Huawei]int eth0/0/4
[Huawei-Ethernet0/0/4]port link-type access
[Huawei-Ethernet0/0/4]port default vlan 20
[Huawei-Ethernet0/0/4]quit


*Set Trunk Port*

[Huawei]int gi0/0/1
[Huawei-GigabitEthernet0/0/1]port link-type trunk
[Huawei-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[Huawei-GigabitEthernet0/0/1]quit



5. Perform a ping test between PCs with the same and different VLANs. If the same vlan is successful and different vlan destination host unreachable, then the vlan configuration on the huawei switch is successful.


Usually each vlan has a different network segment.


==========================================================
Subscribe My Channel :


   / @ittutorial5155  


==========================================================
Other Video :


   • How to Add / Delete a User Account Pi...  


How to Add / Delete a User Account Picture in Windows 10


==========================================================