DIY Wireless Microphone RF Distribution

This is a personal project I have been working on for a long time. I go over the use of TV splitters in wireless microphone systems. In the end you will see you can have an 8 way RF distribution for $1,700 LESS than what you would purchase a factory system for. Also there is no degradation of the signal using these splitters!

Now, this is a long video, there is a lot that I cover in this video but all of it is important. I cover a lot of different things from the Frequency Spectrum of wireless mics, to antennas used in systems, and then using Television Coaxial Splitters for distributing to multiple wireless receivers.

P.S. Sorry about my over tendency to use the word, UMM.


8 Way RF Distribution System:
8-Way Splitter - PCT-VB-8U - $21.46 (x2)
WA5VJB 400-1000MHz Log Periodic Antenna - $28 (x2)
SMA to BNC Adaptor Cable - $10 (x2)
Paladin Tookls 9715 RG6/RG6Q BNC Compression - $21 (x2)
PCT-TRS-6 Universal RG6 Compression Connector - $6
Compression Connector Tool - $20
50 Feet RG6Q Coax - $20

Total Cost: $206


RF Power Combiner for IEM Transmitters
Mini-Circuits ZBSC-8-82+

This works for combining 8 IEM transmitters in the 10-800MHz range at up to 125mW each transmitter. This will combine the signals of each IEM transmitter into one antenna.

If you haven't already, make sure to check out my new website https://dbbaudio.com for the latest news and updates!