How to Replace Upper Ball Joint 1994-2004 Chevy S10

Buy Now!
New Ball Joint from 1AAuto.com https://trq.video/ia-1ASBJ00013
New Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK01593

This video shows you how to install new, quality TRQ ball joints on your 1994-2004 Chevy S10. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.

This repair was done on a 1994 Chevrolet S10 Base 2.2L Standard Cab Pickup 2-Door RWD Automatic and the process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10

Tools you will need:
• Pry Bar https://trq.video/oyf-1AXAA00020
• 11mm Socket https://trq.video/oavg-1AXAA00015
• 12mm Socket https://trq.video/oavg-1AXAA00015
• 19mm Socket
• 22mm Socket https://trq.video/ogT-1AXAA00266
• Dead Blow Hammer
• Pickle Fork
• Metal Cutters
• Air Chisel
• Ratchet https://trq.video/oaEt-1AXAA00016
• Socket Driver
• Swivel
• Torque Wrench https://trq.video/oYM-1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Paper Towels https://trq.video/oqp-1AXSS00035
• Center Punch https://trq.video/ogU-1AXAA00055
• File
• Floor Jack https://trq.video/oDk-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oBc-1AXAA00065
• Wire Brush https://trq.video/okc-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Chevy S-10 2nd Generation 1994-2004:    • Chevy S-10 2nd Generation 1994-2004  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.