How to Replace Front Brakes 2013-2018 Hyundai Santa Fe

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1ABFS02882

This video shows you how to install new front brake pads and rotors from TRQ on your 2013-2018 Hyundai Santa Fe. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

Estimated installation time for a professional technician is approximately: 54 minutes

This repair was done on a 2016 Hyundai Santa Fe Sport Base 2.4L Sport Utility 4-Door FWD Automatic and the process should be similar on the following vehicles:
2013 Hyundai Santa Fe Sport
2014 Hyundai Santa Fe Sport
2015 Hyundai Santa Fe Sport
2016 Hyundai Santa Fe Sport
2017 Hyundai Santa Fe Sport
2018 Hyundai Santa Fe Sport

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obIN/1AXAA00013
• Phillips Bit in a Ratchet
• Pry Bar http://1aau.to/oaaJ/1AXAA00020
• 10mm Wrench http://1aau.to/oae8/1AXAA00010
• 14mm Socket http://1aau.to/occs/1AXAA00015
• 17mm Socket http://1aau.to/occs/1AXAA00015
• 21mm Socket
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. http://1aau.to/oaX/1AXAA00289
• Ratchet http://1aau.to/ocdv/1AXAA00016
• Torque Wrench http://1aau.to/obfR/1AXAA00044
• Anti-Seize Grease
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oQN/1AXSS00035
• Gloves http://1aau.to/obdN/1AXSS00048
• Safety Glasses
• sanding disc
• Floor Jack http://1aau.to/oaAZ/1AXAA00068
• Jack Stands http://1aau.to/oanM/1AXAA00065
• Wheel Chocks
• Wire Brush http://1aau.to/oyV/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.