Maksiwa - Platinum Automatic Edgebander CBC.P - How to Assemble

*Attention: some parts are located underneath the machine! Watch the full video to see where.
If you have any questions, contact us at: [email protected]

Steps:
0:08 - Unwrap machine.
0:19 - Set aside parts to use later.
0:27 - PARTS LOCATED UNDERNEATH THE MACHINE.
0:39 - Remove cap from cleaning agent spray bottles and connect tubes.
0:58 - Unscrew bolts to detach machine from the pallet.
1:15 - Release machine from the pallet.
1:27 - Mount wheels to mounting bracket.
1:38 - Lift machine.
1:40 - Loosen nuts to remove shipping brackets.
1:56 - Align brackets on both sides and screw bolts to secure wheels.
2:12 - Lower machine.
2:13 - Unwrap extension table.
2:21 - Remove Allen bolts from support bars.
2:27 - Slide support bars into extension supports.
2:35 - Screw a Allen bolts back in.
2:24 - Repeat the process on the opposite side of the machine.
2:53 - Unbox brackets that keep extension table in place.
3:03 - Attach brackets to the support bars on both sides of the machine.
3:20 - Take off the two Allen bolts from both sides of the extension table.
3:37 - Flip the extension table.
3:40 - Reattach the Allen bolts and tighten them down.
3:49 - Slide extension table back in place.
3:54 - Attach tape support wheel.
4:00 - Open the back door of the machine.
*Cut all zip ties before you do so.
4:06 - Add the glue drainage system pot under glue pot.
4:11 - Install the handle for conveyor height adjustment.
4:15 - Engage the flush scrapers.
4:19 - Engage the glue pot.