How to Replace Inner Tie Rod 2004-2008 Acura TL

Buy Now!
New Tie Rod from 1AAuto.com http://1aau.to/ib/1ASTE00361

The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2004-2008 Acura TL.

This process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL

Tools you will need:
• Pry Bar http://1aau.to/oc/1AXAA00020
• 24mm Wrench
• 19mm Socket http://1aau.to/oc/1AXAA00043
• Inner Tie Rod Removal Tool http://1aau.to/oa/1AXAA00062
• Large Locking Pliers
• Pliers
• 3/8 Inch Air Impact Gun
• Torque Wrench http://1aau.to/oc/1AXAA00044
• Wire Ties

Subscribe:    / @trq  

Check out our playlist:
Acura TL 2004-2008 3rd Generation:    • Acura TL 2004-2008 3rd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.