How to replace the Rear Brake Pads 2009-2018 Dodge RAM 1500 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/RAM1500

Our video shows you how to change the rear brake pads on your 09-18 RAM 1500. You will need to lift the vehicle, remove the brake caliper, remove the pads as well as carry out a few other steps. Take your ratchet and your 13 mm socket and let's get started!

⚙️ NEEDED CARPARTS AND PRODUCTS
Brake pad set : https://carparts.solutions/RearBrakeP...

Brake cleaner : https://carparts.solutions/BrakeCleaner

Copper grease

💪 TIGHTENING TORQUES
Slide pins
2014 and earlier : 22 Ft-lbs
2015 and later : 24 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Dodge RAM 1500 :
https://carparts.solutions/ToolBox

List of the tools we used to replace the rear brake pads on a Dodge RAM 1500 :
Hydraulic jack : https://carparts.solutions/FloorJack
Jack stands : https://carparts.solutions/JackStands
Wheel lug wrench
Big flat head screwdriver
Ratchet
13mm socket
Cable or Hook
Flat head screwdriver
Wire brush
Torque wrench :
20 to 250 Ft-lbs https://carparts.solutions/TorqueWren...
100 to 600 Ft-lbs https://carparts.solutions/TorqueWren...
Cloth

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2009 RAM 1500
2010 RAM 1500
2011 RAM 1500
2012 RAM 1500
2013 RAM 1500
2014 RAM 1500
2015 RAM 1500
2016 RAM 1500
2017 RAM 1500
2018 RAM 1500

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your dodge ram 1500 safely :    • How to jack your Ford F150 safely ? ⬆ 🚗  

How to replace front brakes, rotors and pads (Complete guide) 🚘 :    • How to replace front brakes, rotors a...  

⚠️ CARPARTS.COM'S INFOS
Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.

Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.

Drive smoothly and avoid sudden braking for the first 30 miles or so, to avoid glazing the new pads.
What do we mean by "glazing new brake pads"? Brake pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:10 How to pull up your RAM 1500
0:59 Remove the brake caliper
1:55 Remove the pads
2:09 Remove the anti-rattle clips + Cleaning
2:28 Install the new the anti-rattle clips
2:46 Prepare and insert the new pads
3:07 Put the caliper back + Tightening
3:43 Safety tips
3:52 Put your RAM 1500 back on the ground
4:03 Tips