SPGuard Smartwatch Screen Protector LiQuidSkin Full Coverage for Huami Amazfit Stratos Multisport

1. Be sure that you have all the necessary materials needed. Each SPGuard "Spray Install" kit will include an installation bottle, paper squeegee, lint-free cloth and screen protector for your device.

2. Find a flat, clean and well lit work environment before you start installing the SPGuard Screen Protector. This is to make sure that you avoid dust, lint, small hair follicles or other micro-debris from getting under the film during the installation process.

3. Turn off your device. If possible, also remove the battery.

4. Wipe your device's screen with the lint-free cloth and remove all visible dust and fingerprints.

5. Wash your hands thoroughly to make sure no dirt or oil get on the screen protector or screen.

6. Spray your fingertips with the installation solution bottle provided. Moistening your fingers will help prevent any fingerprints from getting on the screen protector or screen during installation.

7. With your wet fingertips, carefully peel the SPGuard Screen Protector from its backing liner.

8. With one hand, hold the film steady with the adhesive side facing up. With your other hand, begin to spray the screen protector's adhesive side with the installation solution bottle provided.

**Be sure to spray a COMPLETE AND EVEN LAYER on the adhesive side**

9. If the screen protector is dripping wet, gently shake off the excess installation solution.

10. Place the screen protector on your device. You should be able to easily slide the SPGuard Screen Protector on the adhesive side around to make bubbles out. Please take your time until visible bubbles is disappeared.

11. Make the SPGuard Screen Protector is aligned with the watch,take one hand to hold the film in place. With your other hand, you'll be pushing out all the excess solution from under your SPGuard Screen Protector with the Paper Card provided(please wrap the card with the lint-free cloth to aviod scratch the screen protector).

**AVOID pushing the solution into any holes, speakers, and buttons on your device**

12.Make any necessary adjustments and take your time until the SPGuard Screen Protector is completely aligned. Let your device sit for at least 12-24 hours if possible. We suggest installing the SPGuard Screen Protector at night before heading to bed. By morning, the SPGuard Screen Protector should be settled onto your screen, and your device should be ready to go.