Скачать или смотреть Installing PSC BIG BORE XD® DDS® Steering on Ford F-450/F-550 4WD | Josh Allen Install Guide

If you’re running a 2018–2025 Ford F-450 or F-550 4WD — whether it’s built for off-road, work, or emergency response — this steering upgrade’s built to handle it. Josh Allen from PSC Motorsports walks you through the full install of our BIG BORE® High Performance DDS® Steering System, designed to give your Super Duty better control, stability, and steering feel.

This kit includes our Dynamic Damping Stabilizer (DDS®) — the first of its kind through-shaft cylinder assist that helps keep your truck tracking straight, even in sand, mud, or highway speeds.

Josh breaks down the install step-by-step, with tips to make sure everything lines up right the first time.

View the PDF install guide: https://bit.ly/SK756installguide

👉 Ready to upgrade your steering? Get the kit at: https://www.pscsteering.com

Timecodes:
0:14 - Intro
0:33 - Getting Started/Secure the Steering Wheel
1:09 - Jack Up Truck & Remove Tires
1:42 - Remove any Aftermarket Stabilizer
2:02 - Disconnect High & Low Pressure Lines
2:31 - Drain the Power Steering System
2:53 - Disconnect the Steering Shaft
3:13 - Disconnect the Drag Link off the Pitman Arm
4:05 - Remove OEM Steering Gear
4:59 - Swap Pitman Arm onto New Steering Gear
8:04 - Replace O-rings and Reinstall Factory Lines
8:32 - Install New Steering Gear
11:27 - Reinstall Pitman Arm and Install Fitting on MBK100
15:27 - Remove and Reseal Diff Cover, Install HA-H3000MG-D and Install MB45-K
17:14 - Install Heim, Alignment Spacer and Washer on DDS® Cylinder
19:23 - Installing the DDS® Cylinder
20:02 - Install Tie Rod Clamp
21:42 - Mount the DDS® Cylinder
23:38 - Mount the Skid Plate
25:33 - Begin Bleeding Procedure
26:23 - Outro