Скачать или смотреть airflow reduce aerodynamic drag and significantly improve fuel efficiency—with savings of up to 11%.

Overview: FuelEX Vortex Generator (FVG)
Revolutionize Your Drive with Aerodynamic Intelligence

FuelEX Vortex Generators (FVGs) are compact, precision-engineered aluminum devices developed using advanced aerospace technology. When mounted at the rear or underbody of vehicles, they optimize airflow, reduce aerodynamic drag, and significantly improve fuel efficiency—with savings of up to 11%.

Key Performance Advantages

• ✅ Perfect Road Grip from Frontal Air Pressure
FVGs enhance downward pressure at the vehicle’s front, improving traction and grip—especially useful at high speeds and during sharp turns.
• ✅ Superior Highway Stability in Crosswinds
FVGs streamline airflow and balance aerodynamic forces, ensuring exceptional grip and stability even during strong side winds or on open highways.
• ✅ Under-Wing Pressure for Fuel Savings
Installed strategically under the rear wing or roof edges, FVGs generate controlled vortices that press the vehicle downward, reducing drag and improving fuel economy.
• ✅ Silky Drive Under Strong Winds
By minimizing turbulence and stabilizing airflow, FVGs deliver a smooth, quiet, and stable driving experience, even in harsh wind conditions.

How It Works: Aerodynamics in Action
FuelEX Vortex Generators create miniature controlled vortices at the rear or under specific aerodynamic zones of the vehicle. These vortices re-energize the boundary layer of airflow, transforming chaotic wake turbulence into smooth laminar flow. The result: reduced pressure drag, improved stability, and lower engine load, leading to greater efficiency.

Core Benefits at a Glance

Core Benefits at a Glance
• 🚗 Up to 11% Fuel Savings
• 🌬️ Enhanced Stability in Windy/Rainy Conditions
• 🌱 Reduced Greenhouse Gas Emissions
• 💨 Improved Rear and Side Aerodynamics
• 🔩 Simple Installation (Adhesive or Rivet Options)
• ♻️ Maintenance-Free & Eco-Friendly
• 🛣️ Extended Comfort on Long-Distance Drives

Technology You Can Trust
Inspired by aviation-grade aerodynamics, each FuelEX Vortex Generator generates dual complementary vortices that cancel out drag-producing eddies. Using industrial-strength adhesive or secure rivet fittings, FVGs are built to endure the demands of high-speed travel while saving fuel and enhancing safety.


🔧 Installation Instructions: FuelEX Vortex Generators (FVG)
Tools Needed:
• Clean cloth
• Masking tape or measuring tape (to mark straight line)
________________________________________
✅ Step-by-Step Installation Guide
1. Clean the Surface
Thoroughly wipe the rear roof surface (top back edge) of the vehicle using a clean, dry cloth. Ensure the area is free from dust, grease, or moisture.
2. Mark a Straight Line
Use masking tape to draw a straight horizontal line across the top rear section of the roof. This will guide the alignment of the vortex generators.
3. Position the Units
Align and space 10 FVG units equally along the line. Ensure the distance between each unit is consistent for optimal aerodynamic performance.
4. Remove Adhesive Covers
Carefully peel off the sticker covers from the bottom of each unit.
5. Stick and Press Firmly
One by one, place the units onto the marked line. Press firmly for a few seconds to ensure a secure bond with the vehicle surface.
6. Finish
Once all 10 parts are installed and aligned, remove the masking tape. The installation is now complete!
________________________________________
⚠️ Tips for Best Results
• Perform installation in dry weather.
• For maximum adhesion, avoid washing the car for 24 hours after installation.
• Optional: Rivet installation can be done for permanent setups.