How To Oil And Grease Your Pocket Watch Parts While Reassembling (hamilton Part 3)!

Pocket Watch Repair: This video is part three of the restoration of a Hamilton grade 974 pocket watch. I reassemble the watch parts and oil the jewels. I also put oil and grease on the parts of the movement that need them as I am doing the reassembly.

I show what types of oils and grease to use and what parts get different types of oil.

This is the watch from the Hamilton Green Crystal video:
   • Is The Green Crystal A Pocket Watch K...  

Part 1: Disassembly    • How To SAFELY Disassemble Pocket Watc...  
Part 2: Pre Cleaning and Final Cleaning    • Cleaning Your Pocket Watch Can Be Tri...  
Part 3: Oiling, Greasing and Reassembly (This Video!)


This video and channel is about antique pocket watch repair/restoration for the hobbyist, beginner and intermediate pocket watch enthusiast!

Get to know me and support me on Patreon: I would really appreciate it!
https://www. Patreon.com/MyHobbiesareNOTCheap

Support me by buying merchandise that I have created especially for you! (I get a portion of the $ for the items you order):
https://my-hobbies-are-not-cheap.mysp...


If you found this video helpful, please like it and SUBSCRIBE to the channel so that you can be notified of the videos as I put them up!

Thanks for watching!

Membership:
National Association of Watch and Clock Collectors (NAWCC)


00:00 Intro
01:14 Best oils for watch lubrication
01:46 Moebius HP 1300 oil for slow turning wheels
02:20 Moebius 9010 oil for faster turning wheels
02:36 Moebius 9504 grease for metal to metal lubrication
03:08 How to transfer oil from container to oil pot
03:49 Parts that do not get any oil placed on them
04:39 Starting the reassembly of the watch and installing keyless works
06:40 Applying 9504 grease to keyless spring
07:12 Installing intermediate wheels and oiling posts
08:12 Applying grease to winding shaft and clutch pinion
08:52 Installing escape wheel, pallet and pallet bridge
10:24 Installing fourth wheel
10:49 Installing train bridge over fourth wheel and escape wheel
10:58 Lining up train wheel pivots through jewel holes
12:30 Installing third wheel and center wheel
13:17 Kendrick & Davis mainspring winder model # 128 set up
13:40 How tos select the right hub for mainspring barrel to fit in
14:13 Attaching the mainspring to the winder shaft
15:07 Winding up mainspring into hub
16:02 Pushing wound up mainsping into mainspring barrel
16:56 How to oil the mainspring
17:31 Fitting mainspring barrel arbor
18:23 How to oil lower balance jewels on Pocket watch
18:39 Setting lower balance jewels
19:19 How to place mainspring barrel into movement
19:31 Fitting barrel bridge on to movement
20:46 How to put grease on click spring installing click
21:15 Installing upper crown wheel
22:15 installing ratchet wheel
22:38 Oiling upper balance jewel
22:54 installing upper balance jewel into balance bridge
24:02 Attaching the balance wheel to the balance bridge
24:48 Oiling dial side of main plate
25:30 Installing canon pinion ,minute wheel and hour wheel
26:20 Checking setting mechanism
26:47 How to install balance bridge to movement
28:07 Oiling center wheel and third wheel with HP 1300 oil
28:28 Oiling fourth wheel and escape wheel with Moebius 9010 oil
28:54 How to reset regulator to center position of balance
29:29 Money saving tip on buying oils and grease for watch repair