Subaru WRX/STI (GR/GV) Hood Louver Kit Install

Installation video of our Subaru WRX/STI (GR/GV) Hood Louver Kit on our shop GV.
-----
Subaru WRX/STI (GR/GV) Hood Louver Kit: https://www.verus-engineering.com/pro...
-----
What's included with this kit?
Left-Hand Hood Louver
Right-Hand Hood Louver
Left-Hand Wicker
Right-Hand Wicker
(32) 8-32 Stainless Serrated Nuts
Paper Template
Warning Label
Small Sticker
-----
Tools Needed for Install:
Ratchet or electric-powered ratchet
10mm socket
11/32 socket
Scissors
Hammer
1/16” drill bit (any small drill)
1/2” stepped drill
Center punch (or un-used tap with a sharp point)
11/64" drill bit
Countersink
90-degree air grinder
Abrasive roll-lock wheels
Drill
Painter’s tape
Tape Measure
Straight Air Grinder
Cut-off Wheel
Goggles or safety glasses
Large piece of carpet
Vacuum
-----
Facebook:   / verusengineering  
Instagram: https://www.instagram.com/verusengine...
Twitter:   / _verus_  
-----
Music Credit: 1 Hour Songs
-----
Chapters:
0:00 Intro
0:42 What Come's In The Kit
1:25 Tools Needed
2:30 Removing The Hood
3:31 Drilling Into The Hood
10:17 Cutting The Underside Of The Hood
11:40 Installing The Hoof Louver
16:45 Signing Off