Welding of Sarnafil T welding cord with WELDY energy 1600

The WELDY energy 1600 tool is a perfect tool to weld Sarnafil® T welding Cord (a SIKA company product).

Application conditions/ Limits
The use of Sarnafil® T welding Cord is limited to geographical locations with average monthly minimum temperatures of -30 °C. Permanent ambient temperature during use is limited to +50 °C.

Resistance
Not applicable for permanent exposure to UV irradiation.

Installation Method/ Tools
According to the valid installation instructions for Sarnafil ® T flat roof waterproofing membranes.
Using the WELDY tubular nozzle 5 mm, the WELDY speed welding nozzle assembled on the WELDY energy 1600 tool. The Sarnafil® T welding cord is welded to the membrane along the Sarnabar perimeter fastening to prevent the membrane from slipping.

Notes of Installation/ Limits
Installation works must be carried out only by Sarnafil Registered Contractor.
Temperature limits for the installation of the membrane:
Substrate temperature: -30 °C min. / +60 °C max.
Ambient temperature: -20 °C min. / +60 °C max.

Installation of some ancillary products, e.g. contact adhesives / Cleaners is limited to temperatures above +5 °C. Please observe information given by Sarnafil Product Data Sheets.

Special measures may be compulsory for installation below +5 °C ambient temperature due to safety requirements in accordance with national regulations.

NOTE
Due to SIKAS continuing program of research and development, the specification and information's above are subject to change without prior notice. Please check regularly on the SIKA homepage.

To the Product:
https://www.leister.com/en/product/En...

https://www.leister.com

#roofwelding
#sarnafil
#cordwelding