JetBlack VICTORY Smart Trainer- Getting Connected

Welcome back!
Now that your bike is mounted on your Victory Trainer, let’s get you connected.

Grab the power cable included with your Victory, feed it underneath the rear leg of the trainer, and plug it into the power port. When the trainer turns on, the LED lights will cycle through red, blue, and green before entering pairing mode. This process takes less than 5 seconds.

PAIRING DEVICES & APPS
When the LED flashes blue, your Victory is ready to pair with the JetBlack Training App or any other platform.
If you haven’t already, download the JetBlack Trainer App from your phone’s app store.

To connect your Victory Trainer:

Open the JetBlack app.
Select “Controllable Trainer.”
The app will search for available trainers. When your Victory is recognized, select it. The LED will turn solid blue once connected.

Next, use the JetBlack app to connect accessories like your heart rate monitor or Smart Turn Block to the Victory Trainer.

Your Victory includes a Bluetooth Device Bridge, allowing you to pair Bluetooth-compatible heart rate monitors and the JetBlack Smart Turn steering device, freeing up Bluetooth connections on your Apple TV.

Pro Tip:
Make sure to fully close the JetBlack Trainer app before attempting to connect to Zwift or any other training app.

Note for Apple TV users:
Apple TV only supports two Bluetooth connections, plus the remote. If you try to connect more than two devices, Zwift will show a "device limit" message. You can use the JetBlack Bluetooth Bridge or connect multiple devices, like Zwift Play controllers and other accessories, using the Zwift Companion app.

UPDATING VICTORY FIRMWARE
Before your first ride, check and update your Victory firmware:

Open the JetBlack App and go to “Settings.”
Select “Firmware Update.”
If an update is available, select “Update.”
Note: Firmware updates can only be done over Bluetooth.

CONNECTING TO WIFI
Your Victory is Wi-Fi enabled, offering a more stable connection with better signal coverage. Here’s how to connect:

In the JetBlack app, ensure Victory is connected.
Go to “Settings” and select “Wi-Fi Connection.”
Scan for available networks, select your network, enter your password, and hit OK.
Once connected, a solid green LED will appear on your Victory Trainer.
Pro Tip:
To use Wi-Fi on Zwift, select the Wi-Fi icon for Power Source, Resistance, and Cadence.

ZWIFT BONUS OFFER
If you're using Zwift, don’t forget that new users get 2 months of free access with your Victory Trainer. Your unique access code is printed on the round Zwift Cog Instructions.

For guidance on connecting to Zwift and installing your Zwift Click, refer to the Zwift videos or support info on their website.

Ride on!
____

Visit our website to see our full range of products:
http://jetblackcycling.com/

Get our latest news by following us on these channels:

Facebook:   / jetblackcyclinginternational  
Twitter: @JBCyclingINTL
Instagram: @jetblackcycling
Vimeo: https://vimeo.com/jetblackcycling