Скачать или смотреть Milwaukee Grinder Not Going? Try This Trick!!

This YouTube video involves a repair to a Milwaukee M18 Fuel Grinder model M18CAG115XPDB brushless. The repair involved replacing the switch, which is not a separate part, but rather connected to the motor field coil, the PCB board, and battery connector. The cost of buying a new part would not have been economically viable. By a stroke of luck, I had another Milwaukee
of the same model with a burnt out motor, but a functioning switch. The repair was carried out by cutting the wires and removing the switch from the burnt out grinder, and soldering it into the one with the bad switch. This worked well, but there was a further complication upon reassembling the repaired grinder. The armature was rubbing against the field coil, causing noise and wear that would give the grinder a very short life. I proceeded to reopen the grinder and used a simple piece of paper placed between the body and the field coil, allowing the armature to rotate freely. This made the repair completely successful.