BLINKING LED ON BREADBOARD - Arduino tutorial #2

In this Arduino for beginners tutorial I teach you about the breadboard, LED, resistors and how to make a LED on a breadboard blink. Code: https://arduino-tutorials.net/tutoria...

Resistor calculator:
https://www.allaboutcircuits.com/tool...

The Arduino for beginners tutorials series guides you through the world of Arduino. A video is around 10 minutes and shows you step-by-step how to build the circuit and write the code. The website contains the course material, circuit diagram, Arduino code and shopping list of all the components used in the tutorial.

⬇️ Arduino code, circuit diagram and part list https://arduino-tutorials.net/tutoria...

👉 More tutorials and projects on https://arduino-tutorials.net

🇳🇱 Bekijk deze tutorial in het Nederlands op    • 🇳🇱 KNIPPEREND LED OP BREADBOARD - Ard...  

CHAPTERS
00:00 Components needed
00:23 The breadboard explained
01:35 The LED explained
02:30 Resistors explained
03:32 Building the circuit
04:40 The running project

COMPONENTS
🇨🇳 Arduino Uno (clone)
https://arduino-tutorials.net/r/KnSgtg

🇳🇱 Arduino Uno (clone)
https://arduino-tutorials.net/r/8237Hd

🇳🇱 Arduino Uno SMD (original)
https://arduino-tutorials.net/r/Ud29dh

🇳🇱 Arduino Uno Chip (original)
https://arduino-tutorials.net/r/Jd82ha

🇨🇳 300x assorted LEDs
https://arduino-tutorials.net/r/dvQO6t

🇳🇱 100x LEDs (5 colors)
https://arduino-tutorials.net/r/823Dhs

🇨🇳 3x breadboard
https://arduino-tutorials.net/r/k8rZRv

🇳🇱 1x breadboard small
https://arduino-tutorials.net/r/238Jds

🇨🇳 1x breadboard large
https://arduino-tutorials.net/r/ZnW9L4

🇳🇱 1x breadboard large
https://arduino-tutorials.net/r/8237Dh

🇨🇳 2000x Resistors
https://arduino-tutorials.net/r/FHHA69

🇨🇳 Jumper wire male-male
https://arduino-tutorials.net/r/pkoGV4

🇳🇱 Jumper wire male-male
https://arduino-tutorials.net/r/8237Jd

CHAPTERS:
00:08 Requirements
00:34 Breadboard
01:45 LED
02:44 Resistors
03:43 Building the circuit

VIDEO SUMMARY:
The video is a tutorial on using an Arduino board, which is a microcontroller that can read and write signals. Bas explains the different parts of the board, like the USB connector, power plug, digital and analog pins, power section, and reset button. They also show you how to use the Arduino IDE to upload code and run programs. In the tutorial, Bas demonstrates how to make an LED on the board blink using a pre-written example code from the IDE. They also mention that there are many other examples available for different sensors, displays, GSM, and SD card readers that can be used for future projects.

#arduino #BasOnTech