BMW 128i |

Not my first time on this track with this car, but my first time trying to go for a timed lap instead of drifting the infield. Before I came to the track I expected it to be pretty boring as it's a very short circuit, but the bank just adds a whole other element that I've never experienced before. And hitting that bump in the middle of the bank at over 100mph only adds to the experience. I was also not expecting this track to absolutely destroy my tires because after just 2 hours of driving the tires I came on, which to be fair were already very worn, went all the way down to cords, which I think helps explain why the front end felt like I was driving on ice. I had a goal of 1:06 based on similar cars, aka a track-prepped e36 m3, however, I greatly underestimated the condition of my tires. I'll definitely have to come back again

Instagram: slow.e82
complete build thread: https://www.1addicts.com/forums/showt...

Cover photo credit: midnightm3dia on instagram

Engine Mods:
Catless eBay headers
Custom 3 Inch straight pipe with a single vibrant resonator (no secondary cats)
MILVS
Injen Intake
StageFP tune
-n54 intake manifold
-N2MB wotbox with no lift shift and 2 step

Diff Mods:
3.73 from auto car
Mfactory metal plate v2 LSD setup 25/45 ramps 100% lock 120lbs preload
turner solid diff mounts

Suspension Mods:
Revalved Ohlins R&T
Swift Springs 70/120
M3 front control arms
Vorshlang camber plates
Megan racing adjustable pillowball camber, toe, and upper trailing arm
Whiteline poly subframe bushings

Brakes:
e9x 335i Front brakes
e9x 328i rear brakes
Ferodo ds2500 pads for canyons/street and Ferodo dsunno for track with Motul rbf600 fluid but I was running dsunno in this video
-solid brass caliper bushings

Other Mods:
OEM n54 oil cooler
Apex arc8 17x8.5 40 wheels with 245 40 17 re71r tires
1M Style slim front bumper
Sparco grid q seats
Autopower roll cage
Nelson Racing Wheel carbon fiber sunroof delete
Sparco 6-point harnesses
Rear half of the car is gutted
All electronic nannies coded out
-custom brake ducts with 3d printed inlets and 2-inch high temp hose
-racing dynamic strut brace
-lci led tail lights

2975lbs with full tank, no driver