Auto Recovery at an Angle with Snatch Blocks (with Hook)

Get yours today!

Sizes Available:
1) 2 Tons 3" Sheave (3/8" Wire rope)
2) 4 Tons 4 1/2" Sheave (1/2" Wire Rope)
3) 8 Tons 6" Sheave (3/4" Wire Rope)
Snatch Block with Hook: https://www.myteeproducts.com/snatch-...

Snatch Block with #Shackle: https://www.myteeproducts.com/snatch-...

Snatch Block with Shackle and #Chain #Anchor: https://www.myteeproducts.com/snatch-...

The snatch block with hook is a pulley system with covered and protected yet removable sides.
It is possible to unscrew or remove one side, slip in the winch cable or rope and then re-protect the same side to prevent the cable from leaving the groove.
It has either a hook or a shackle at it’s tip.
Wire rope snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point.
They are also used to create more complex pulley structures and gain mechanical advantage.
A pull of 10 lbs can be changed to a pull of 80 or even 800 lbs depending upon the mechanical advantage offered by the pulley structure.
#towing #snatchblock #myteeproducts