#NanoLongRange

Posting this for an informal challenge in the IntoFPV forum.
Build thread here: https://intofpv.com/t-3d-printed-nano...

Conditions:
Temp: 13 degC
Wind: Approx 5 kph (on the return trip)
Capacity recharged to battery: 2704 mAh

5km turnaround point at 8:35
OSD flight summary at the end.

It's a silent movie :)
I didn't have music long enough for the whole flight.

**** 5" Freestyle Quad ****
Frame: TBS Source One V4
Motors: Samguk 2207 2600 KV
FC: MAMBA F405 MK2
ESC: MAMBA F40
FPV Cam: Caddx Ratel Starlight 2.1mm
HD Cam: GoPro Hero 5 Black
VTX: TBS Unify Pro32 HV
Antenna: Rush Cherry 5.8 GHz
RX: ImmersionRC Ghost Atto
Props: Gemfan 51433 Hurricane
Battery: GNB 1350mAh 4S 100C

Rotorbuilds link: https://rotorbuilds.com/build/26474

**** Quick Parts List ****
- Dave_C Nano LR Remixed & Modified Frame (printed in CF PETG)
- RCInpower 1202.5 11500 KV motors
- HGLRC Zeus 411 AIO FC (Betaflight 4.3 and BLHeli_M 24 kHz)
- ImmersionRC Ghost Atto RX and Qtee Antenna
- ImmersionRC Tramp Nano VTX
- Caddx Ant camera
- TrueRC Singularity Lite VTX Antenna
- 220uF Low-ESR Cap (came with FC)
- IFlight LC filter
- Pololu S9V11F5 regulator
- Gemfan 3018 props
- IFlight GPS
- AUW 110g

Rotorbuilds link: https://rotorbuilds.com/build/26858

**** Gear ****
Goggles: Skyzone 02C
Goggle Antenna's:
TrueRC OCP 5.8 - 1.6 dBic Omni
TrueRC X²-AIR 5.8 - 13 dBic Patch (long range setup)
TBS 5G8 5 dBi Patch (short range setup)
Radio: Radiomaster TX16S Hall
Transmitter: ImmersionRC Ghost JR Module
Transmitter Antennas: TrueRC True-MoX 2.4