How to setup and configure the Ixxat CM CANopen Module

The CM CANopen enables system integrators to connect any CANopen or CAN 2.0A device to the SIMATIC S7-1200 PLC. The module plugs into the communication module interface of the S7-1200 and acts as a bridge between the CANopen or CAN devices and the SIMATIC basic controller, allowing integrators to choose from a wider range of automation products when designing their system.
In this video you will learn how to set up and configure your CM CANopen device with the seamless integration of the CM CANopen module into the TIA Portal. The configuration of the connected CANopen network can be performed easily using the CM CANopen Configuration Studio, which we provide free of charge.


1) Links:
a. The Ixxat CM CANopen Module: https://www.ixxat.com/products/produc...
b. Download CM CANopen Configuration Studio:
1) https://www.ixxat.com/technical-suppo...
2) https://www.ixxat.com/docs/librariesp...


2) For further information, please visit our Websites:
a. https://www.ixxat.com
b. https://www.hms-networks.com/
4) LinkedIn:   / hmsnetworks  


Chapters:
00:00 Video content
00:08 Trailer
00:15 Introduction
01:26 Configuration for a CM CANopen module
04:06 Verification of PDO mapping