The Floating Dust Shoe (The very best dust shoe out there?) VCarve tutorial.

I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here. My DIY Floating Dust Shoe How To video.

Music - ”Killers” by Josh Woodward. Free download: http://joshwoodward.com/

VCarve files Link: https://drive.google.com/file/d/1wBwi...

Clamp Part Vectors Link: https://drive.google.com/file/d/1xdqb...

Middle part Vectors Link: https://drive.google.com/file/d/18V2C...

Brush Part Vectors Link: https://drive.google.com/file/d/1H2Hw...

All parts in DXF: https://drive.google.com/file/d/1uDDB...

Here is links to the Swedish stores were I bought the material for the shoe. You can search on eBay for steering gear boot and door sealing brush or door bottom sweep as well.

http://www.biltema.se/sv/Bil---MC/Bil...

https://www.jula.se/catalog/bygg-och-...

http://www.biltema.se/sv/Bygg/Kemikal...

https://www.clasohlson.com/uk/Neodymi...

Tool data for this project.

3mm single flute end mill.
Spindle speed 18000 r.p.m.
Feed Rate 1800 mm/min.
Plunge Rate 900 mm/min
Pass Depth 1.5 mm.
Stepover 1.2 mm.

6mm Single Flute end mill
Spindle speed 18000 r.p.m.
Feed Rate 1800 mm/min
Plunge Rate 900 mm/min
Pass Depth 1.5 mm.
Stepover 2.4 mm

90 degree 10 mm V-bit
Spindle Speed 18000 r.p.m.
Feed Rate 1800 mm/min.
Plunge Rate 900 mm/min
Pass Depth 1.5 mm.
Final Pass Stepover 0.21 mm.
Clearance Pass Stepover 2.5 mm