EASY Replace Honda Accord knock sensor WITHOUT removing intake manifold P0325 Element TSX CRV

#honda #knocksensor #doityourself

How to replace your knock sensor without removing the intake manifold

Sample vehicle in video is a 2006 Honda Accord
===========================================
2003 - 2006 Honda Accord
2004 - 2008 Acura TSX
2003 - 2011 Honda Element
2002 - 2006 Honda CR-V
===========================================
Difficulty Level - 2/5 EASY

Labor book time 2.5hrs/150mins
Actual time 0.3hrs/20mins

Do it yourself! or shop around, don't get nickel and dimed
===========================================
Tools Used:
3/8” Ratchet with extension
3/8" 27mm socket
Flathead screwdriver
Needle nose pliers
===========================================

Thank you for watching! Please consider subscribing.

Subscribe here    / @greasemonkeytips  

===========================================


Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result. Due to factors beyond the control of GreaseMonkeyTips, I cannot guarantee against improper use or unauthorized modifications of this information. GreaseMonkeyTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage or loss that may result from improper use of these tools, equipment or from information contained in this video is the sole responsibility of the user and not GreaseMonkeyTips.