Скачать или смотреть Hard To Remove Toilet Spud.

It all started when I was called to fix a leaking toilet. After removing the tank and inspecting the flange, I noticed the spud — that little connector between the toilet bowl and the waste pipe — was stuck tight. No matter how much I tried, it refused to come out. It was like it had fused itself into the pipe over the years of use.
I tried the usual tricks: applying a little WD-40, gently rocking it back and forth, and even tapping around the edges with a rubber mallet. Still, no luck. The spud was firmly embedded, and I was worried about damaging the porcelain or the pipe.
The Solution:
Realizing I needed a different approach, I decided to carefully cut around the spud, taking care not to crack the porcelain. I gradually cut through the old, corroded material, working slowly and patiently. Once I made a clean cut, I was able to gently extract the stubborn spud.
Outcome:
After removing the old, stuck spud, I cleaned the opening thoroughly and installed a new one. The toilet was back in perfect working order, and I learned an important lesson: sometimes, patience and the right tools are the key to conquering the toughest plumbing challenges.
Conclusion:
So, if you ever face a hard-to-remove toilet spud, don’t give up! With patience, the right tools, and a careful approach, you can overcome even the most stubborn fittings. Thanks for watching, and don’t forget to like and subscribe for more plumbing stories and tips!#theartofplumbing #howtoplumbing #plumber