LANGGAR LUBANG TAK RASA, CORNER STABIL DAN SENYAP. How to Rebuild the Front Suspension in your Car.

Salin semua bush bawah Wira. Nak kasi sedap.
Langgar Lubang Tak Rasa
Coner Stabil
Senyap Sunyi
Suspension Baru
Tukar Baru
How to Rebuild the Front-End Suspension System in Your Car.

--------------------------------------------------------------------------------------------------------------------------------------------------------------
In this video, I will share with you guys. How to remove, replace, and rebuild the front-end suspension system in a car, especially for Wira. I've decided to completely refurbish and rebuild the front-end suspension system to ensure my car remains in top-notch condition. I will be replacing the lower arm with the strut insulator, a.k.a absorber mounting. The inner tie rods, a.ka rack ends. The outer tie rod ends with new boot covers. All the front bushings, and pretty much everything in the front end rebuild. It's easiest by far to just take it apart once, and swap out everything at the same time, and be good for another 100k miles. If you do this, allow plenty of time for repairs. People in a hurry will make mistakes or break something. Go slow and methodical, and pay attention to how it comes apart so you can put it back together. Replacing a car's front-end suspension system is kind of like swapping out an old mattress for a new one; it can be a total game-changer for comfort and performance. This is how I done it, and it's worked for me very well.
--------------------------------------------------------------------------------------------------------------------------------------------------------------
ITEM Used :
https://invl.io/clki5ta - WIRA Adjustable Absorber Suspension Set (Hi Low Body Shift)
https://invl.io/clki4nx - ABSORBER MOUNTING
https://invl.io/clki4p2 - TIE ROD END RACK END STEERING BOOT COVER SET
https://invl.io/clki5tz - STABILIZER BAR BUSH
https://invl.io/clki4pw - FRONT LOWER ARM
https://invl.io/clki4o9 - FULLSET ENGINE MOUNTING
https://invl.io/clki5u8 - CROSSMEMBER BUSH 1 SET
https://invl.io/clki614 - STEERING RACK RUBBER
Tools:
https://invl.io/clki4og - Inner Tie Rod/Rack End Wrench Remover Removal Tool
https://invl.io/clki4ox - Ball Joint Separator Extractor Removal Tool
https://invl.io/clkiecz - Heavy Duty Cordless Impact Wrench
https://invl.io/clki61q - 1/2 & 3/8 & 1/4-Inch Drive Torque Wrench Ratchet
https://invl.io/clkief9 - Ratchet Socket Wrench
https://invl.io/clkieeu - Wrench Spanner Set (8~24mm)
https://invl.io/clkiedb - 1/2" Deep Long 6 Point Socket
https://invl.io/clki61b - 2 Ton Portable Hydraulic Floor Jack
https://invl.io/clkiee3 - 3 Ton Jack Stand
https://invl.io/clkieel - 2 Ton Heavy Duty Scissor Jack
https://invl.io/clkiefl - Claw Hammer
https://invl.io/clkieeb - WD-40
https://invl.io/clkieew - Cutter
https://invl.io/clki4nt - Nylon Anti-Sliding Gloves
https://invl.io/clkiefv - Screwdriver
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Video kali ini, saya akan kongsikan dengan anda. Macammana saya buka pasang a.k.a rebuild sistem suspention, terutamanya untuk Wira. Saya buat keputusanuntuk rebuild sepenuhnya dengan satu tujuan nak sedap kan balik macam baru. (kalau dapat laa). Komponen yang terlibat, lower arm, inner dan outter tie rod. Ganti juga semua bush yang dah keras dan bende² lain yang penting pada bahagian depan. Alang² dah bukak, sekali penat, sekali modal dan sekali jalan salin barang² bawah Wira. Fuh.. Mantap..!! Jika anda juga buat yang sama macam saya. Sedikit tips yang boleh saya kongsikan. Ambil masa anda, jangan tergesa². Orang yang tergesa-gesa akan melakukan kesilapan. Slow and steady, one by one and fokus. Menggantikan suspention sistem kereta adalah seperti menukar tilam lama dengan yang baharu; ia boleh menjadi pengubah permainan total untuk keselesaan dan prestasi. This is how I done it, and it's worked for me very well.
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Use this information at your own risk. Any injury, damage, or loss that may result from improper use of any tools and equipment or from the information contained in this video, the user must take responsibility. If you think this video is helpful for you, remember to give it a "thumbs up" and "subscribe" my channel..

subscribe : https://bit.ly/2JgWWAc