Скачать или смотреть Vigilance Control Device for Electric Locomotives। ELECTRIC LOCOMOTIVE VCD REST।VCD TROUBLESHOOTING

VCD gives cyclic warning to the driver. Based on drivers reaction to this warning in terms of any of the pre defined sets of actions to be done by the driver the system automatically resets the alerting cycle. In case, the driver fails to acknowledge the initial alert signals a set of additional alert indications are given. Even failing to respond to these additional alert signals also will result in automatic application of penalty brakes.

Some of the pre-defined set of actions to reset Alerter cycle can include:

Change of notch position Master Handle Reverser
Increase decrease of level of dynamic braking
Normal application of formation brakes
Operation of locomotive horn
Operation of sanding valves
Pressing of VCD reset button
Other customized actions based upon locomotive type
These pre-defined set of actions are regularly monitored by VCD system and VCD cycle is reset whenever any of the above actions takes place.

In case the driver fails to acknowledge the Alerter warning signal during initial time period say 60 sec an additional indication in form of blinking LED will be given for a pre-defined time. After the predefined time if acknowledgement is not yet received, an additional audio alarm is given. If the driver further fails to acknowledge the alarm, automatic application of brakes will take place and Engine is brought to IDLE speed.

vigilance control device
vigilance control device in locomotive
vigilance control device for trains
vigilance control device pdf
vigilance control device circuit diagram