2017 Ford Fusion Oil Change Step by Step

In this video I go through the steps that are needed to do an oil change on a 2017 Ford Fusion. This will work on 2014-2020 Ford Fusions with the 1.5L Ecoboost. It is a simple DIY and will save you a lot of money especially over a long period of time. Let me know if you have any questions or comments and Thanks for Watching!

Subscribe to my Channel: https://bit.ly/3kwzddS

Items Needed for Oil Change:
Motor Oil - https://amzn.to/2W9G84e
Oil Filter- https://amzn.to/3gkhogV

Steps to do Oil Change:
Step 1: Lift car and place safely on Jack Stands.
Step 2: Remove Splash Shield below engine using 10mm Socket and Flathead Screwdriver.
Step 3: Remove Drain Bolt using 13mm Socket and Oil Filter using Oil Filter Wrench.
Step 4: Re-install Drain Bolt and Oil Filter.
Step 5: Add 4 quarts of Oil and check for any leaks.
Step 6: Re-install splash shield and lower car safely.
Step 7: Start and run car for a minute then shut off and do final check on oil level and add accordingly.









No copyright infringement intended.

DISCLAIMER: DannyDoItAll does not assume any liability, including, but not limited to: injury, loss, or property damage incurred as a result of any information contained within this video. All of the aforementioned is the sole responsibility of the viewer. This video is for informational purposes only and is to be used at your own risk. Safe practices are always encouraged, especially when working on vehicles or any other DIY project, and while using any and all types of tools. This video does not guarantee any particular result.