Скачать или смотреть Create a Multi-Layer PDMS Micromixer

Part 1 – Create a Multi-Layer PDMS Micromixer

Does your PDMS bond well?
Using our ProFluidics 285D printer and Master Mold for PDMS Photopolymer Resin, you can create master molds that enable PDMS layers to bond reliably and firmly.
Cast your PDMS layers directly on these molds without photolithography.
Print time: under 4 hours. No cleanroom, no outsourcing.

This micromixer has a three-layer structure:
• Bottom layer: two 50 µm channels
• Middle layer: 200 µm herringbone pattern
• Top layer: 1 mm × 2 mm reservoir

We printed all three mold layers in one job using the ProFluidics 285D and our Master Mold for PDMS Resin (print time: under 4 hours). No cleanroom, no outsourcing.

Want to see how it performs? Stay tuned for Part 2!

Product used:
ProFluidics 285D
➡ https://cadworks3d.com/3dprinters/pro...

Master Mold Resin
➡ https://cadworks3d.com/3d-materials/p...

#additivemanufacturing #biotechnology #drugdelivery #pointofcare #bedsidediagnostics #organonachip #LabOnAChip #softlithography #pdms #photolithography #biomedicalresearch #photopolymer #cleanroom #CytoClear #cellvaible #cell #cadworks3d #ProFluidics285D #ease #research #3Dprinting #microfluidics #bioengineering