How to Replace Front CV Axle 08-12 Ford Escape

Buy Now!
New CV Axle Shaft Set from 1AAuto.com http://1aau.to/ia/1AACS00276

This video shows you how to remove an old, broken, rusted, corroded, or bent CV axle from your 08-12 Ford Escape, and replace it with a new, quality, engineered to fit axle from TRQ.

• Check here for more videos on the 2008-12 Ford Escape:    • Ford Escape 2008-2012 2nd Gen  

This process should be similar on the following vehicles:
2008 Ford Escape
2009 Ford Escape
2010 Ford Escape
2011 Ford Escape
2012 Ford Escape

Tools you will need:
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 32mm Socket http://1aau.to/oa/1AAST00003
• 8mm Socket http://1aau.to/oa/1AXAA00017
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• 1/2 Inch Breaker Bar http://1aau.to/oa/1AXAA00078
• 1/4 Inch Ratchet http://1aau.to/oa/1AXAA00017
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Rust Penetrant
• Center Punch http://1aau.to/oa/1AXAA00055
• Hammer http://1aau.to/oa/1AXAA00091

Subscribe:    / @trq  

Check out our playlist:
Ford Escape 2008-2012 2nd Gen:    • Ford Escape 2008-2012 2nd Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.