How To Set Up a Hobie Cat 16

This video was made to show how to set up a Hobie 16. The year of this boat is 1994.
After winter this is the first time that I got it out to clean, and set it up.
Links for navigation of this video.
0:00 Intro
0:25 Hitch on to car or pickup
0:45 Hooking up the trailer
2:43 Inspecting the boat
3:15 Taking off the boat cover
3:37 More inspections, shroud adjusters, access ports, stanchions
4:12 Tie downs
5:29 Dolphin striker, supports, jib sheet, jib halyard, storage bin, wind vane, sail box, lug wrench, rudder storage
6:47 Spare tire, wench, forward mast support, rear tie downs, aft mast support, lights, removing comp tip mast cover
6:40 Mast inspection, aft rudder storage, tiller and tiller extension storage, hull plugs
9:52 Attaching the rudders, connecting tiller and tiller extension, rudders in an upright position
12:18 Fishing tackle box for tools and spare parts, cat shackle tool, mast bearings, mast hinge
13:57 Mast tang, top of shrouds, shackles, fore stay pulley, main halyard installation, halyards attached to tramp for storage, untangling halyards, mast prep for raising the mast
16:15 Raising the mast, attaching the bridle to the forestay
17:41 Lowering the aft mast support, removing the sails from the sail box, inspecting the jib, tightening the jib battens, raising the jib
20:28 take out the mast hinge, tighten the mainsail battens
21:35 Main halyard to the mainsail head, luff into the sail track, raising the mainsail
23:44 Jib sheet through the cam cleats to the jib blocks and back to the cam cleat, attaching jib blocks to the clew of the jib, attach the downhaul blocks to the mast
26:40 Stowing the jib and main halyards into the pocket of the trampoline
27:35 How the jib traveler car remote system works, trapeze handles and wires
28:56 Sidebars, non-slip surface, tight tramp, attach main sheet to the boom, outhaul adjustment, main traveler
30:49 Telo cat wind vane, standard Hobie bridle vane, tape on the shrouds
32:10 Final look