Full Setup on Fender Telecaster - hammering high frets, reassembled bridge, fretboard conditioning

We performed a full setup on my friend's beloved Telecaster. We found some high spots and used a hammer to lower a few frets, crowned and leveled them, and polished all of the frets. Under the pickguard, we resoldered one of the wires on the side of the switch. The bridge also needed some attention; we removed the set screws on each saddle, oiled them, and put them in the proper order to align with the radius of the fretboard. We finished off the setup by adjusting the pickup heights, oiling and tightening some of the hardware, setting the radius of the bridge, checking the nut slots, conditioning the fretboard, and the restringing and intonating.

Thanks for watching - hope you enjoy the video! Visit our website if you are interested in having us setup your guitar, or if you want it featured in a video!