RIPP Supercharger Install | 3.6L Pentastar WK2 | Beginners Guide Step-by-Step

Definitely Follow Along! I wish this video existed when I installed it!

1. Remove Front Bumper & Front Skid Plates (0:06)
2. Download HP Tuner Software & Stock Tune (14:49)
3. Disconnect batteries, Install HP Tuners Bypass Cable, and ship PCM to HP Tuners (16:21)
4. Remove engine cover, PCV line, sensors, and air intake system (19:29)
5. Drain coolant (20:34)
6. Disconnect vacuum pump (21:45)
7. Remove EGR & Intake Manifold (23:16)
8. Replace Injectors (27:28)
9. Gap Spark Plugs (30:29)
10. Remove Coolant Hardline (32:25)
11. Reinstall Intake Manifold & EGR (34:00)
12. Remove belt & Insert Spacer + Idler (24:53)
13. Relocate Vacuum Pump (35:38)
14. Mount Supercharger (change shipping port) & Route New Belt (36:47)
15. Mount Intercooler & Relocate Horns (37:39)
16a. Assemble Boost Pipes, Blow-off/Bypass Valve (39:16)
16b. Insert Vacuum Line t-fitting & Pressure Valve for PCV line (40:05)
17. Reconnect Unlocked PCM (41:31)
18. Refill Coolant Tank (42:28)
19. Reconnect Battery Terminals (44:24)
20. Clear DTC & Install RIPP Base Tune (45:52)
21. Make sure everything is connected and fastened! (49:00)
22. Start Car & Monitor at Idle (49:03)
23. Reattach Bumper (50:32)
24. Log Data to make sure tune is proper. (50:35)
25. Follow to stay up-to-date on the build and enjoy your new whip!! (52:49)
--------------------------------------------------------
Video Credit:
Bypass Cable Install (by Mark Sickmiller)
   • Jeep Grand Cherokee 2018 Security Byp...  

Intake Manifold Disassemble (by MotorCity Mechanic)
   • Part 2/2: Recall S85 inspection and 3...  

Gapping Spark Plugs (by ChrisFix)
   • How to Gap a Spark Plug  
--------------------------------------------------------
Instagram.com/SquatSimp