Скачать или смотреть How To Make Electric Lighter At Cheap Price

Sure! Here's a step-by-step guide on how to make a simple electric lighter:

Materials Needed:
1. *3.7V Battery* or any suitable power source.
2. *Thin Nichrome Wire* (about 30-gauge).
3. **Two Alligator Clips**.
4. **Electrical Tape**.
5. *Small Switch* (optional for convenience).
6. *Heat-resistant base* (like a piece of ceramic or metal).
7. **Insulated Wires**.
8. *Safety Equipment* (gloves, goggles).

Tools Needed:
1. **Wire Strippers**.
2. **Pliers**.
3. *Soldering Iron and Solder* (optional for secure connections).

Steps:

1. *Prepare the Nichrome Wire:*
Cut a small piece of nichrome wire, about 2-3 inches long.
This will be the heating element of your electric lighter.

2. *Attach Alligator Clips to Nichrome Wire:*
Attach one end of the nichrome wire to one alligator clip.
Attach the other end of the nichrome wire to the second alligator clip.
Make sure the connections are tight and secure.

3. *Connect Wires to the Alligator Clips:*
Strip the ends of two insulated wires.
Attach one wire to one alligator clip and the other wire to the other alligator clip.
Use electrical tape to secure the connections if necessary.

4. *Connect to Power Source:*
Attach the other ends of the insulated wires to the 9V battery terminals. You can use electrical tape to secure the connections.
If you're using a switch, connect the wires to the switch first, then from the switch to the battery.

5. *Secure the Heating Element:*
Place the nichrome wire (heating element) on the heat-resistant base. Ensure it is secure and positioned so it won't touch anything flammable.

6. *Test the Electric Lighter:*
If you have used a switch, turn it on. Otherwise, simply complete the circuit by connecting the wires to the battery.
The nichrome wire should heat up and glow red hot within a few seconds.
Use the glowing wire to ignite paper or other light materials.

Safety Tips:
*Always wear safety gloves and goggles* to protect yourself from accidental burns or sparks.
*Do not touch the nichrome wire* while it is hot, and be cautious of surrounding flammable materials.
*Disconnect the battery* when not in use to avoid accidental ignition or overheating.

Optional Enhancements:
*Enclose the setup in a non-conductive casing* for a more professional and safe finish.
*Add a rechargeable battery pack* for a more sustainable design.
*Incorporate a voltage regulator* to control the heat output of the nichrome wire.

By following these steps, you can create a simple electric lighter. Remember to handle all materials with care and prioritize safety throughout the process.
Here You Can Learn many diy idea
Follow Facebook Page: https://www.facebook.com/profile.php?...

Background Music Credit:

Track: NCS The Best Of Drum & Bass Mix
Music provided by NoCopyrightSounds.
Watch:• MIX - The Best Of Drum & Bass | NCS -...