How to remanufacture Toner Cartridge for Brother TN-210 TN-240 TN-230 for use in DCP 9010 (CN), HL 3040 (CN), HL 3045 (CN), HL 3070 (CN / CW), HL 3075 (CW), MFC 9120 (CN), MFC 9125 (CN), MFC 9320 (CW), MFC 9325 (CW), DCP9010CN, HL3040CN, HL3045CN, HL3070CN, HL3070CW, HL3075CW, MFC9120CN, MFC9125CN, MFC9320CW, MFC9325CW and reset the page counter and the error message.
TN210, TN230, TN-210BK, TN-210C, TN-210M, TN-210Y, TN-230BK, TN-230C, TN-230M, TN-230Y, TN240
Activate subtitles in your language! -
YIELD TONER CARTRIDGES:
TN210BK –TN230BK 2200 prints
TN210C – TN230C1400 prints
TN210M – TN230M 1400 prints
TN210Y – TN230Y 1400 prints
The drum unit (DR-210CL) is rated for 15000 prints. This printer has 4 separate drums one for each color.
When the printer senses a new toner cartridge, the bias voltage is set to high.
As the cartridge is used, the bias voltage is reduced gradually down to a lower voltage.
This is necessary because a new toner cartridge has a tendency to print light.
As the cartridge is used, the density increases To keep the density level even throughout its life, the density bias voltage is reduced accordingly.
The waste toner is cleaned by a cleaning roller, then stored in the belt waste chamber.
THINGS REQUIRED
Toner for use in Brother TN210
Isopropyl alcool or developer roller cleaner
Screwdriver
PRINTING SETTING PAGES:
1. Press “OK” button 3 times while the printer is in READY state.
2. The printer will show “Print Settings/Printing” on the display and it will run 3-4 pages depending on the configuration.
REPETITIVE DEFECTS
Developer roller 31 mm
OPC drum 94 mm
Upper fuser roller 78 mm
Lower fuser roller 78 mm
For any question or suggestion leave a comment
--------------------------------------------
Link Accessori srl
Via Beverara 224/7
40131 BOLOGNA (Italy)
http://www.linkaccessori.it
email: [email protected]
other links:
http://www.emmegiricambi.it/
http://www.brother-usa.com/
-------------------------------------------------------------------------
Информация по комментариям в разработке