How to apply Swix TSP powder | Swix School

How to apply Swix TSP:
00:11 Distribute TSP powder onto the the skis.
00:25 Iron over the whole ski base.
00:47 Let the ski cool.
00:51 Scrape off with plexi scraper
01:14 Brush in this order: Horsehair, steel, horsehair.
02:04 Polish the base using a nylon brush.
02:20 Wipe off the remaining dust with fiberelene paper.

Remember to always wear a mask and gloves when you are working with ski wax and heat.

Distribute a good layer of powder onto the base of the skis.

Turn up the iron to the recommended temperature. You’ll find this on the product box.

Iron two times with the speed of 5-7 seconds over the whole base.

You can choose to either do the whole width of the ski in one movement or start with the left side followed by the right side.

Let the ski cool for 10 minutes.

Scrape off using a plexi scraper. Do the middle and the sides first, then the whole ski base.

Brush away the residue of the wax using first a steel brush and then a horsehair brush. Make sure to rotate the roto brush in the forward direction of the ski.

We use a roto brush with suction in this video. This removes particles and dust making it a more secure process.

Polish the sole with a nylon brush. 3-4 times.
Note that you also can choose to use hand brushes.

Wipe off the remaining dust with fiberelene paper.

You’re good to go. Happy trails!

Visit www.swixschool.com to learn more.
Swixsport.com