Axiom X Slingshot Owners Manual - Complete setup and tuning

So you've gotten a brand new Axiom X slingshot! Great choice!
Now, let's get it set up properly. https://simple-shot.com/axiomx?ref=si...

Join us in this video as we demonstrate everything it takes to get the axiom X slingshot from unboxing all the way to ready to shoot. It's not hard.

Your Axiom X slingshot comes assembled. All you need to do is tune it into your desired settings.

When you set up your Axiom X slingshot, you can adjust the fork width and the width of the grip. Don't be discouraged if this takes you a few tries to get it perfectly dialed in. That is part of the fun and what is so special about this slingshot frame. Take your time and make it fit your specific desires.

Once you adjust the sizing of the slingshot, you can install your bands. As always, make sure that you know your draw length and therefore the active band length that you need for your slingshot shooting. Once you know your active band length, you can trim your bands to the appropriate length.
And once your vans are trimmed to the correct length, installing them is as simple as can be on the new Axiom X slingshot. Just loosen up the fasteners on the forktips (you don't even need to remove them) and slide your band into the groove. Tighten them down and you are good to go!

As you know, this is a dedicated over-the-top slingshot frame. It does not shoot through the forks. And as you also know, don't ever shoot rocks from this frame.

Hand tight is just right. As with any fastener on any SimpleShot slingshot, you do not need to torque down tightly. If you tighten too far you risk damaging the threads. Just snug it down until it doesn't move.

That's it. Now your new Axiom X is all set up and ready to shoot. Enjoy!

https://simple-shot.com/axiomx?ref=si...