Fusion 360 | Screwdriver Handle (Full Narrated Tutorial)

Full narrated tutorial on creating a screwdriver handle.

This video was inspired by the following Reddit post:
  / not_bad_for_just_eyeballing_it_no_calipers...  

This video is strictly meant as a modelling exercise. It should not be taken as a viable design to be manufactured. The dimensions shown here are arbitrary and might not be practical for an actual screwdriver. My experience with overmolding is very limited and this is my best guess as to how the overmold can be created in this case. Do seek advice from injection molding experts as to how this should be created, especially when it comes to clearances, drafting, parting lines, etc. Lastly, if you wish to skip the starting sketch profile, I have provided a link to download a file with the sketch. Happy modelling!
https://a360.co/3qKHWMk

If you have found this video useful and would like to support me, you can buy me a coffee at
https://www.buymeacoffee.com/fusion36...
or you can also support me on Patreon at
https://www.patreon.com/fusion360scho...

Any contribution can go towards improving the quality of the channel. Thank you.

#fusion360school
#fusion360screwdriver

0:00 Main revolve
2:00 Flange
2:39 Thumb/finger recess
4:20 Creating copies of main body
5:18 Pattern body (split body)
6:40 Pattern body (seed extrude)
8:11 Pattern body (rectangular pattern)
9:17 Pattern body (shell and offset face)
10:04 Rest of overmold (split faces)
12:11 Rest of overmold (shell)
13:07 Combining overmold bodies
14:23 Cutting of substrate
15:21 Clearance between overmold and substrate
16:18 Increasing pattern quantity