Скачать или смотреть etrailer | Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX

Click for more info and reviews of this RV Ride Control Trailer Suspension Parts:
https://www.etrailer.com/Trailer-Susp...
Check out some similar Trailer Suspension Parts options:
https://www.etrailer.com/dept-pg-Trai...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-RV-R...
Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Correct Track Trailer Alignment and Lift Kit for tandem axle trailers or RVs. Now, again, the application, this will fit tandem axle trailers and RVs that have the double eye leaf spring suspensions. This kit will include everything laid out here on the table, the eight suspension plates, eight alignment correction plates, and all the hardware that's needed for installation. There is no drilling required. Now, the newer trucks are being built to ride higher, so that's gonna mean that your trailer may have to be raised to match that height, 'cause if the two aren't the same height at the connection point, the nose of the trailer RV is going to ride too high.

So this is gonna put too much weight on the rear of the trailer, which can result in poor handling and may eventually cause damage. So this Correct Track lift is also great for 5th wheel trailers that might have trouble clearing tall pickup bed side rails. The Correct Track will help solve the problem by lifting your trailer or your RV from 1 1/4 inches all the way up to 2 1/4 inches. And it provides a level towing setup for taller trucks. Now, this kit is designed to work with three inch wide by 3 3/4 inch tall hangers or three inch wide by five inch tall hangers, and leaf springs up to two inches wide.

Basically, this kit will let you move your axle up to a half inch forward or a half inch rearward for proper alignment in an adjusted quarter inch increments. This kit will correct a misaligned axle and lift trailers for level towing. Helps improve the life of your tires and creates a more stable ride. It will provide extra clearance, so you can tow with your tall or lifted vehicle. And it works with your existing leaf spring suspension system.

Basically, the brackets attached to the hangers, and they'll supply new lower mounting point for the springs, which will result in a taller ride height. And the alignment correction plates, which are these plates right here, these will mount on either side of the hangers to shift your axle placement. Now, all these parts are made in the USA. But that should do it for a look at the Correct Track Trailer Alignment and Lift Kit for the tandem axle trailers and RVs.